- New
- There are no more items in your cart
- Shipping
- Total €0.00
- ALFAPARF MILANO
- American Crew
- ARTDECO
- Azalea
- Balamata
- Batiste
- Becker Solingen
- BIKOR EGYPTISCHE ERDE
- Bourjois
- Carmex
- CHI Professional
- CND
- Cosmoway
- Crioxidil Professional
- D FI
- DAYLISSE
- DEARBOO
- Fanola
- FARMSTAY
- Feetcalm
- Fontana Contarini Professional
- Goldwell Professional
- Invisibobble
- Koslita
- KUUL
- Laboratorios Prady Normapiel
- Loreal Professional
- Matrix Professional
- MAYBELLINE
- MULDREAM
- MySalon
- OOTD
- ORJENA
- PRADY
- Proraso
- QURET
- Refectocil
- Reuzel
- Revlon Professional
- ROOTREE
- Salerm professional makeup
- Schwarzkopf Professional
- TENZERO
- TIGI Professional
- Wella Professional
- YEPRE
Nail Drill Machine
JMD303
Nail Drill Machine, white, 20W, 240V, 0-35,000RPM
Description
Nail Drill System
- Material: ABS+Aluminum
- Plugs Type:EU
- Power: 20W
- Input Voltage: 240V 60Hz
- Speed: 0-35,000RPM
- Color: White
- Dimensions of the bit: 2.35mm
- Minimum fitting length of the bit: 10mm
How to use
SET AND OPERATION
- Choose the fitable drill bits.
- Fully insert drill bits to handpiece port.
- Put the handpiece insert to handpiece port of main control box.
- Press Hand/Foot switch to "HAND". Adjust the speed via speed control knob to "0", plugging power supply in "Notice": Make sure the voltage of control box match with country use.
- Change the ON/OFF power switch to “NO” - control box indicator lights up. If you move the speed control knob to adjust the speed, the drill bit starts rotating. You can move the Forward/Reverse Switch to adjust direction of rotation. (When the switch stays on “0”, handpiece is not working)
- Adjust speed and rotational direction of handpiece as request.
- The nail drill has the foot pedal control function. Change the Hand/Foot switch to “FOOT” and insert the foot pedal. If you want to convert back to hand control, change the Hand/Foot switch to “HAND”.
- Control Box can be reclined and upright for more convenient operation.
- After working, change the power switch position to “O”, turn the speed control knob to minimum and remove from the power supply.
CAUTION
- Do not work in a humid place.
- Environment setup: Temperature: +10°C~ +40°C; Humidity: 30~75%; Air pressure: 700-1060hPa.
- Our handpiece should only be used for our control unit.
- Operate the speed control dial in control box softly.
- Turn off the power in order to change the bit.
- Be careful not to drop the handpiece as it may be damaged or broken.
- If any problem occurs in the handpiece, use after repairing.
- Make sure that the switch is off before putting the power plug in the socket, in order to avoid an unexpected injury due to a sudden start.
- Do not open the chuck while operating.
- Be sure to pull out the power cord before moving the control box.
- Use accessories suitable for this product.
- For recommended speed in various applications, follow the manufacture's instruction.
- Wear proper protective equipment, including a dust mask and safety goggles.
Questions(FAQs)