- New
- There are no more items in your cart
- Shipping
- Total €0.00
- ALFAPARF MILANO
- American Crew
- ARTDECO
- Azalea
- Balamata
- Batiste
- Becker Solingen
- BIKOR EGYPTISCHE ERDE
- Bourjois
- Carmex
- CHI Professional
- CND
- Cosmoway
- Crioxidil Professional
- D FI
- DAYLISSE
- DEARBOO
- Fanola
- FARMSTAY
- Feetcalm
- Fontana Contarini Professional
- Goldwell Professional
- Invisibobble
- Koslita
- KUUL
- Laboratorios Prady Normapiel
- Loreal Professional
- Matrix Professional
- MAYBELLINE
- MULDREAM
- MySalon
- OOTD
- ORJENA
- PRADY
- Proraso
- QURET
- Refectocil
- Reuzel
- Revlon Professional
- ROOTREE
- Salerm professional makeup
- Schwarzkopf Professional
- TENZERO
- TIGI Professional
- Wella Professional
- YEPRE
Nail Drill Machine
JMD202
Nail Drill Machine, black, 15W, 240V, 0-30,000RPM
Description
Specifications:
- Rated voltage range: 100-120V/60HZ, 220-240V/50HZ
- Rated power input:15W
- Output rated voltage: DC0-12V
- Rated speed: 0-30000 RPM
How to use
Glazing Machine
Installation and wire connection:
- Connect the 5-pin plug of the portable grinding head/hand piece to the OUTPUT socket at the main part.
- Connect the pedal switch to the FOOT S/W socket.
- Select the proper drill bit according to actual requirements, and fasten it to the handpiece.
- Turn the speed control knob to the left (M/N).
- Connect with the main source power.
Operation:
- Change the function switch to HAND for manual control, the indicator will be on and the grinding head will start to move slowly.
- Turn the SPEED CONTROL to the right to accelerate the speed.
- When the function switch is set on FOOT, step on the pedal and the machine starts working. (Foot switch is optional)
- The turning directions can be swapped: FWD means clockwise direction and REV means counter-clockwise direction.
- Adjust the speed of the grinding head within a reasonable range.
- Please adjust the handpiece to the lowest speed before changing the forward/backward direction.
Instructions:
- Turn the SPEED CONTROL counter-clockwise to decelerate the grinding head to the minimum before turning off. Switch the main power source to 0.
- After operation put the grinding head on the top of the main panel.
- While the grinding head is in operation, never pull off the 5-pin plug from the portable grinding head.
- For long idle time, please disconnect the source power.
- Any unauthorized disassembling of the products is prohibited. In case of any breakdown, please contact the agent or authorized repair center.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard.
Questions(FAQs)